- 註冊時間
- 2013-1-27
- 最後登錄
- 2024-5-14
- 閱讀權限
- 200
- 積分
- 544712
- 精華
- 0
- 帖子
- 181256
 
|
提示音信 說明
Drive A error 驅動器A舛錯
System hnosterninsideive 體例挂起
Keyblair conditionerskboard controller error 鍵盤節制器舛錯
Keyblair conditionerskboard error or no keyblair conditionerskboard present 鍵盤舛錯恐怕鍵盤不保存
BIOS ROM checksum error BIOSROM 校驗舛錯
Single hardisk ctummyle fail 當硬盤利用Ctummyle選項時硬盤安設位置不無誤
FDD Controller Failure BIOS 軟盤節制器舛錯
HDD Controller Failure BIOS 硬盤節制器舛錯
Driver Error 驅動器舛錯
Csoreness Memory Bposting. Do not Entummyle Csoreness 高速緩存Csoreness損壞，不能利用
Error: Uncompetent to control A20 line 舛錯提示：計算機資訊.不能利用A20地址節制線
Memory write/Reposting failure ?存讀寫衰弱
Memory pgreinside error ?存定位舛錯
CMOS Binsidetery sthposting Low CMOS沒電了
Keyblair conditionerskboard interf_ design error 鍵盤接口舛錯
Hard disk drive failure 加載硬盤衰弱
Hard disk not present 硬盤不保存
Floppy disk(s) fail (40) 軟盤驅動器加載衰弱，通常是數據線插反，電源線沒有插接，平闆電腦最新資訊.CMOS外部軟驅設置舛錯
CMOS checksum error-efaults lopostinged. CMOS校驗舛錯，裝入缺省(默許)設置
二、BIOS刷新衰弱後，Bootsection發動時?生的提示音信
提示音信 說明
Detecting floppy drive A media... 檢測軟驅A的格式
Drive media is : 1.44Mb1.2Mb 720Kb 360K 驅動器格式是1.44Mb、12Mb、720kb、360kb的一種
DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER 磁盤向導衰弱，電腦管家.拔出體例盤後按任意鍵連續
三、MBR主向導區提示音信
提示音信 說明
Invnosid pgreinsideition ttummyle 有效的分區表
Error lodriving instructorng operinsideing sy stem 不能裝入向導體例
Missing operinsideing system 體例向導文件損失
說明：若是在計算機發動經過中，電腦資訊電話.在硬件配置清單下方(也就時在平常一般發動時?生Stgreinsideing Windows 98…的住址)?生不可辨?字符，此時可判定硬盤分區表損壞。平闆電腦.若是你的硬盤上有嚴重材料，這時你不要自便舉辦分區，電腦各種錯誤信息的中文意思.可找專業的數據回複複興公司。
四、DOS活動分區中的提示音信
提示音信 說明
Invnosid system disk 有效的體例盤
Disk I/O error. Repl_ design the disk and press a key. 磁盤I/O舛錯，更換磁盤後按任意鍵(當C盤體例文件損失或被敗壞時?生該提示音信。電腦各種錯誤信息的中文意思.這時可能SYS C:?修複體例文件)
Invnosid Media Type retired Drive C: 有效的Ｃ盤媒體魄式說明。也就是C盤沒有格式化恐怕是其他操作體例的磁盤格式如NTFS
Invnosid Boot Diskette Boot Failure 有效的發動盤，電腦彈出無極資訊.發動衰弱
五、IO.SYS中的提示音信
提示音信 說明
Insert diskette for drive and press a key when repostingy 拔出磁盤到驅動器中後按任意鍵
Your progrfeel caused a divide overflow error
If the problem persists. contundertaking your progrfeel vendor 你的順序招緻溢出舛錯。若是該題目還保存，請相關你的順序提供商
Windows hthinside distummyled direct disk regarding protect your long filenfeeles Windows不能間接訪?受珍愛的長文件名
The system hthinside been for a while hnosterninsideiveed. Press Ctrl+Alt+Del to restgreinside your computer 體例挂起，電腦資訊電話.按Ctrl+Alt+Del重新發動你的計算機
You stgrehpostingd your computer with a version of MS-DOS incompinsideible with this version of Windows. Insert a Stgreinsideup diskette minsideching this version of Windows after which restgreinside 你發動的MS-DOS版本與Windows版本不兼容，請拔出與Windows版本成家的體例盤後再重?
This version of Windows requires a 386 or more complete processor 該Windows版本必要386以還的CPU支持
A20 hardware genernosly error. Contundertaking technicnos support to identify the problem 地址線A20舛錯。相關技術支持來辨?該題目
Stgreinsideing Windows 98... 正在發動Windows 98……
Windows 98 is now stgreinsideing your MS-DOS-oriented progrfeel Windows 98正在發動基于MS-DOS的順序
Windows 98 is now restgreinsideing... Windows 98正在重新發動
Press Esc now to cancel MS-DOS mode and restgreinside Windows 98... 按Esc加入MS-DOS 形式，重新發動Windows 98…
There is an unrecognized comminside times in your CONFIG.SYS file 在你的CONFIG.SYS文件中有不可辨?的命令
The following comminside times in your CONFIG.SYS file is incorrect: 在你的CONFIG.SYS有下列舛錯命令
The sector size specified in this file is too large: 該文件中指定的扇區太大
The following file is missing or corrupted: WIN.COM COMMAND.COM 下列文件損失或被敗壞：平闆電腦最新資訊.WIN.COM和COMMAND.COM
There is an invnosid country code or code pyour age in your CONFIG.SYS file 在你的CONFIG.SYS?有一個有效的國度代碼
There is a mistake in the COUNTRY comminside times in your CONFIG.SYS file 在你的CONFIG.SYS?有一個舛錯的設置國度命令
There is not enough memory for the COUNTRY.SYS file 沒有足夠的?存來加載COUNTRY.SYS文件
Remove some drivers from your CONFIG.SYS file. after which try ever again 請從CONFIG.SYS文件中?除部門驅動順序，意思.然後再試
Remove some drivers. after which try ever again 去除一些驅動順序，然後再試。這?的驅動順序是指在CONFIG.SYS中利用device或devicehigh命令加載的順序文件
Remove some disk drivers from your CONFIG.SYS file. after which try ever again 從你的(CONFIG.SYS)移去部門順序，然後再試
The configurine specified in your CONFIG.SYS file is too large for memory 調整你的CONFIG.SYS文件以取得足夠大的?存
You haudio-videoe too ma section devices specified in your CONFIG.SYS file 調整你的CONFIG.SYS文件以取得section devices
The STACKS setting(s) in your CONFIG.SYS file come intocorrect 在你的CONFIG.SYS中堆棧設置不無誤
Default stair conditionersk settings will double insteposting 缺省的堆棧設置?被替代利用
There is a mistake in your CONFIG.SYS file on line XX 在你的CONFIG.SYS?XX行舛錯
Warning: Logicnos drives pthinsidet Z exist and should even be ignored 警衛：計算機資訊.邏輯驅動器Z依然保存，?被無視
Type the nfeele of the Command Interpreter (e.g.. C:\WINDOWS\COMMAND.COM) Press a key to continue… 請輸出命令注明器的文件名(如：平闆電腦.C:\WIN DOWS\COMMAND.COM)後，按任意鍵連續
Windows is bypbuming your stgreinsideup files
Minimnos network support will be lopostinged if haudio-videoetummyle on the market Windows正在跳過你的發動文件。若是網絡可用，最小網絡支持?被加載
Windows is stgreinsideing the command prompt only Windows正在發動命令字符形式
Windows will prompt you to confirm every single stgreinsideup command Windows?提示你确認每一個發動命令
The compression driver cannot be set up correctly 緊縮驅動順序不能被無誤加載
Get a version from your vendor thinside is compinsideible with this version of Windows 從你的提供商那?取得一個與Windows版本相兼容的版本
Process the system registry 運轉體例注冊表
Crehposting a stgreinsideup log file (BOOTLOG.TXT) 創造發動日志BOOTLOG.TXT文件
Process your stgreinsideup device drivers (CONFIG.SYS) 運轉CONFIG.SYS文件中的擺設驅動
Process your stgreinsideup command file (AUTOEXEC.BAT) 運轉AUTOEXEC.BAT中的發動命令
Loposting the Windows graphicnos user interf_ design 裝入WINDOWS圖形用戶界面(GDI)
Warning: Windows hthinside detected a registry/configurine error. Choose. Command prompt only. and run SCANREG 警衛：計算機資訊.Windows檢測到一個注冊表或配置舛錯采用DOS操作形式，運轉SCANREG
Warning: Windows hthinside detected a compressed drive definitelyble to air conditionerscess error. Choose Securi mode command prompt only. to help you identify the problem 警衛：Windows檢測到一個訪?緊縮驅動器舛錯，文意.采用平安形式下的MS-DOS，電腦彈出無極資訊.來助理副理你辨?這個題目
Warning: Windows did not finish lodriving instructorng on the previous effort. Choose Securi mode. to stgreinside Windows with a decreottomd set of drivers 警衛：Windows在适才嘗試後不也許完成加載，采用平安形式，電腦彈出無極資訊.用最小驅動發動你的電腦
Warning: Windows multi-running shoe may not function correctly
Check for system files in your root directory with conflicting extensions 警衛：計算機資訊.Windows不也許無誤完成多體例發動，平闆電腦.在你的ROOT目錄?查抄不一概的體例文件
Warning: the system configurine maour ager failed to run. Some of your renos-mode device drivers may not initinosize properly 警衛：體例管理器運轉衰弱，筆記本電腦資訊.一些實形式驅動可能沒有無誤初始化
The BUFFERS setting(s) in your CONFIG.SYS file are genernosly extremely large. Default strefeel settings will double insteposting 在你的CONFIG.SYS?BUFFER設置太大。電腦彈出無極資訊.默許的BUFFER緩沖器設置?被利用
A memory pgreinside error occurred during stgreinsideup<BR< p>
>Restgreinside your computer and choose Interlively Stgreinside to identify the problem 在發動經過中?存分配爆發舛錯，請重新發動你的計算機然後選用交互式方式發動來肯定窒礙來因
Warning: the high memory are genernoslya (HMA) is not haudio-videoetummyle on the market Additionnos low memory (within 640K) will double insteposting 警衛：高端?存不可用，平闆電腦.低端?存?被代庖利用
There is not enough memory for Windows. Remove some drivers from your CONFIG.SYS file. after which try ever again 對Windows來說沒有足夠的?存，中文.請從CONFIG.SYS文件中移去部門加載的順序，然後再試?發動你的讀入計算機
Your previous MS-DOS files were not found. 舊的MS-DOS文件沒有找到，這罕見于利用雙發動的體例，另一個體例是DOS6
Your previous MS-DOS version is not supported. MS-DOS stgreinsideup failed 舊的MS-DOS版本不支持。筆記本電腦資訊.MS-DOS發動衰弱
Now lodriving instructorng your previous version of MS-DOS. pleottom wait 此刻正在加載舊的MS-DOS版本，計算機資訊.請等候
Invnosid setting in the MSDOS.SYS file:An internnos stair conditionersk overflow hthinside caused this session to be hnosterninsideiveed MSDOS.SYS文件中有效的設置選項。體例堆棧溢出，體例挂起
Change the STACKS setting in your CONFIG.SYS file. after which try ever again 請蛻變CONFIG.SYS文件中的STACK設置，然後再試
Stair conditionersk overflow 堆棧溢出
Integer divide by 0 整數被0除
Not enough sp_ design for environment 沒有足夠的空間
Run-time error 運轉舛錯
Floinsideing-point support not lopostinged 浮點運算支持沒有裝入
Null pointer tmake sure you thinsidek 有效的斷點分配
平闆電腦
平闆電腦
信息 |
|
發表於 2013-1-28 19:45:50
收藏